Car Wrapping Film

Can I wrap my car in car wrapping film?

Yes, you can, but it requires a good amount of patience. Wrapping film, also called taxi film or wrap film, is specifically designed for wrapping cars (you can also use it to wrap many other things). The film is designed for dry mounting and has small air channels in the adhesive, making it ideal for wrapping objects. You shape the film by heating it with a heat gun and then pulling it over the rounded shapes, so it stretches and adapts to the shape. If you happen to stretch the film too much, simply heat the film again, and it will return to its original state, allowing you to try again. Of course, you should be careful not to stretch the film so much that it becomes too thin and tears.

Can I remove the film again if it doesn't sit completely right in the first attempt?

Yes, you can. Due to the air channels in the adhesive, the film is not permanently sticky right away. You can easily remove the film from the surface again and reapply it. By post-heating the film (up to 80 degrees) after mounting, the adhesive becomes permanent, and the film retains the new structure you've given it.

What does dry apply mean?

The film has channels in the adhesive, which are made with small air channels in the adhesive itself. This makes it easy to remove any air bubbles that might form when you install the film. Because of these small channels, you MUST NOT install the film with soapy water, as the water will then be "trapped" in the air channels.

Where can I use taxi/wrapping film?

You can use the film for many purposes. You can wrap your car or, for example, just the car's side mirrors. You can put the film on your refrigerator or on your kitchen cabinets. You can apply the film to your laptop or your bicycle. Only your imagination sets the limits.

What tools do I need to be able to mount taxi film?

At the most basic level, a hobby knife, a measuring tape, and a mounting scraper are a very good idea. We include a mounting scraper with the film, but for larger projects, it might be a good idea to buy a mounting scraper with felt so you don't scratch the film during installation. A heat gun is essential for heating the film into recesses and for heating the film on curved surfaces, and not least for post-heating the film when it's fully mounted. Knifeless Pro Tape can be a really good tool to use if you don't want to cut into the film and where there's a risk of cutting or scratching the surface under the film, e.g., the car's paint.

Does car wrapping film damage the car's paint or windows?

the car wrapping film is installed and removed correctly, it should not damage the car's paint or windows. The biggest damage often occurs when using a knife during the installation and cutting too deep. This can be avoided by using knifeless tape which cuts the film from underneath.

How do I maintain my car wrapping?

To extend the life of your car wrapping, you should wash the car regularly with a soft sponge or cloth and mild soapy water. Avoid pressure washers and chemical cleaners as they can damage the film.

How long does it take to wrap a car in car wrapping film?

The installation time for a car wrapping varies depending on the size of the car and the complexity of the design. It normally takes between 1-3 days to do a full car wrapping.

How many meters of wrapping film do I need for my car?

Calculate the necessary amount of wrap film by measuring the car. Use the calculated surface area and add extra material to determine the total amount of wrapping film you need to buy. Remember to follow the manufacturer's recommendations and specified coverage area.

How do you measure a car to calculate the amount of wrapping film?

Measuring a car to calculate the amount of wrapping film requires accurate measurements and careful planning. Here is a step-by-step guide to measuring your car:
Preparation:
Park the car in a place where you have good space to measure and work around it. Make sure the car is clean and dry, as dirt or moisture can affect the result.
Materials and tools:
Use a flexible measuring tape. Paper and pencil to take notes.
Another person can make the process easier by helping with measurements and keeping the measuring tape stretched.
Start with the large surfaces:
Measure the length and width of each panel, such as the hood, roof, doors, and back of the car. Also measure the height of the car.
Consider the shape: For curved areas like corners and bumpers, it may be necessary to take extra measurements and account for the complexity of the surface.
Doors and panels: Measure each door separately and take notes of any protrusions or recesses.
For panels with complex shapes, you can divide them into smaller sections and measure each section individually.
Mirrors and windows: Don't forget to measure the areas around mirrors and windows, as these will also require film.
Overlap and waste: Consider adding a small amount of extra film for overlap and possible waste during installation.
Record your measurements: Take accurate notes and sketches, and use these to calculate the necessary film area.
Consult the film manufacturer's guidelines: Many film manufacturers provide guidelines on how to calculate the necessary amount of film based on the vehicle's dimensions.
Professional advice: If you're unsure, it might be a good idea to contact a professional wrapping company for advice and possibly an accurate measurement.
Remember, it's always better to have a little extra film than not enough, as it can be difficult to match colors and batches later if you run out.